Finishes

Click Here for finish details.

poli-5000_lg

Poli-5000 Powder Coat – The most durable powder coat finish system in the industry. Steel is shot blasted to a near white condition, given a phosphate wash, coated with an epoxy primer, and then followed with a coat of polyester TGIC powder formulated for maximum UV protection, adhesion, and fade resistance. The Poligon Poli-5000 process is a completely in-house system and is available in a wide range of smooth, textured, and metallic colors.

Additional benefits include:

  • Higher surface hardness/scratch resistance than common liquid coatings
  • Reduced chance of damage to coating during installation
  • High resistance to cleaners and chemicals
  • High resistance to wind-borne abrasives
  • Certified by the Powder Coating Institute as PCI-4000
primer_lg

Powder Coat Primer – is electrostatically applied when field paint is required and provides a good base for other paints. The corrosion of Polyester TGIC powder coat primer is superior to typical water-based red oxide primers.

galv_lg

Galvanized – A basic, long-accepted method of protecting steel from corrosion, galvanizing is the process of coating steel with zinc using a hot bath process. Galvanizing is considered the best corrosion protection process available for steel components and is commonly used where exposure to salt air is anticipated. The galvanizing process results in a random, spangled finish that can also have alternating areas of haze and sheen.

Additional benefits include:

  • The zinc finish causes a cathodic process, protecting the steel substrate
  • The zinc corrodes very slowly giving long lasting protection
  • The complete dip coverage of zinc gives 100% protection of steel components
  • Extremely durable, with little or no maintenance required
  • The best and toughest protection available
pcgalv

Powder Coat over Galvanized – The combination of hot dip galvanizing with TGIC powder coating combines the ultimate corrosion protection with the color selection of super-durable powder coating. This long-sought combination has been difficult to successfully achieve but a new proprietary process is now making this finish combination available. Due to the galvanizing process, there will be noticeable texture areas in the final powder coat finish.

Additional benefits include:

  • All of the powder coat and galvanized benefits combined together
  • Longer lasting than any other finish alone – “synergistic effect”
  • Powder coat layer acts as a barrier to protect the galvanized layer
  • Galvanized layer prevents moisture from getting under powder coat layer
  • Largest selection of powder coat colors and textures for finished look